Simple ▪ Safe ▪ Accessible | DIGITAL DENTAL PROTOCOLS
logo LYRA ETK
iPhysio
Shop
HomeI am dentistDental implantsNATURALL+

Naturall+: the anatomical implant

implant dentaire naturall+

Naturall +, the anatomical implant

Dental implant ideal for high-risk areas
Diameter: 3 to 5 mm
Length: 6 to 14 mm

Request this implant

PRIORITY TO PRIMARY STABILITY

Its taper makes it possible to optimize implantation close to the curved roots, to get as close as possible to the sinus cavities. It offers greater positioning latitude for any adjacent implants. It also makes implant insertion easier, guided by the direct engagement of the first third of the implant, and less aggressive thanks to the screwless insertion of the end of the implant body. The cortical bone is less stressed and does not heat up when the upper part of the implant is inserted, allowing better healing.

NET DESIGNED FOR EXCELLENT PRIMARY STABILITY

LYRA ETK has developed an implant architecture that provides excellent primary stability for its range of implants.

Asymmetrical double net
  • Even distribution of masticatory forces
  • Excellent primary stability as soon as the implant is inserted
  • Reduces bone heating and insertion time
Microthread synchronised with the main thread
  • Insertion without tearing the cortical bone
  • Enhanced stabilization of the cortical bone
  • Optimisation of primary anchorage.
  • Greater resistance to axial loads
  • A reduction in shear stress at the bone/implant interface.
Central protrusion between the fillets
  • Increases the contact surface with bone tissue by 15%. 
  • Facilitates osteogenesis
  • Activates cellular reconstruction
Atraumatic and engaging apex
  • A vent closer to the apex to improve the self-tapping effect of the threads.
  • The threads start at the apex for greater self-tapping capacity of the implant and better apical attachment.
  • Safe use in the sub-sinus area.

A SINGLE, SHARED CONNECTION
WITH DENTAL IMPLANTS FROM THE BONE LEVEL RANGE

Naturactis, Naturall+ and iBone dental implants have the same connection. This means that the prosthetic parts you need for Naturall+ and iBone dental implants are the same as those you need for Naturactis, and vice versa. This means you can optimise your stock of prosthetic parts.

A high-performance connection

Bone Level dental implants have an internal hexagonal tapered connection to guarantee :

  • Prosthetic joint sealing
  • The stability of the implant/prosthetic part assembly
  • Precise orientation of the prosthetic components
A unique connection

The unique connection, common to all our Bone Level implants and for all diameters, allows :

  • Rationalisation of the stock of prosthetic parts
  • Simplification of exchanges between the laboratory, the implantologist and his correspondents
  • The choice of gingival platform does not depend on the choice of implant diameter.

PROVEN STAE® SURFACE FINISH

  • Microsanding with titanium oxide
  • Nitric and hydrofluoric acid etching.
  • 30 years of clinical hindsight.
Direct drive from implant to mandrel
  • Saves time during surgery
  • Better visibility of insertion level and connection orientation

YOUR SURGICAL ACCESSORIES FOR BONE LEVEL DENTAL IMPLANTS

kit extraction implant dentaire

Surgical kit

This kit contains all the instruments needed to carry out the surgical protocol and manage all bone densities for all lengths and diameters of Naturall+ and Naturactis implants.

Request it

Stop kit

Universal kit: can be used with all implant ranges (step drills only).

  • Direct drive of the stops to the counter-angle
  • Colour coding for easy identification of the stops according to the diameter of the drill bit used
  • 28 stops for short and long drills included in the kit
  • Kit can be sterilized in an autoclave
Request it
kit extraction bone level

Extraction kit

This extraction kit can be used to remove abutments stuck in the implant, broken screws, and the implant itself. Our extraction kits are available for all our implant ranges.

THINK ABOUT IT!
 NATURALL+ IS ALSO AVAILABLE IN Ø3MM.

Naturall+ is also available in Ø3mm.
 Ideal for narrow ridges or in areas of high anatomical stress.
It has all the advantages of Naturall+.
 Its connection is shared with Ø3 implants.

Streamline your instruments with a common kit for all our narrow implants.

OUR RELIABLE AND PROVEN MANUFACTURING PROCESSES

Certified surface finish

30 years of clinical experience
Microsandblasting with titanium oxide.
Etched with nitric and hydrofluoric acids.

Precise, watertight, validated connection

15 years of clinical experience
Internal hexagonal tapered connection.
A single prosthetic connection common to all implant diameters.

Our quality guarantees

100% French implants
Implants guaranteed for life
Prosthetic part guaranteed for 10 years
CE and ISO 12485 standard

The media library

All the information about our products is available 24/7 in the media library.

Discover the documents

Follow us on social networks!

2023 - LYRA ETK
Contact
cartchevron-down